Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma…
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and…
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model…
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm thru-axle, and you're all set.
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q…
Yakima's Bolt Toploader Brackets are permanently mounted brackets that allow Yakima 1A Raingutter Towers or Q Towers to be used in some situations where your car doesn't have rain gutters (towers sold separately).
Yakima's Side Loader Brackets are permanently side-mounted brackets that fit in the space between the top of your truck and the side window. They allow Yakima 1A Raingutter Towers to be used in some situations where no rain gutters exist (towers sold separately).
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is…
Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.
Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily by placing under hood or trunk and is secured by the closed lid - Boat bow & stern tie-down loops that are fastened inside the vehicle hood or trunk hatch and…
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
RockyMounts' Locking Quick Releases are so super-smooth, you'll probably want to put them on your bike wheels. Alas, that's not exactly what they're for. Use the Locking Quick Release to upgrade an old RockyMounts rack or, for those of you who give your racks a lot of use, replace a worn-out quick…
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can…
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all…
Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Yakima's Wide Body Brackets are permanently side-mounted brackets for some fiberglass or camper tops with steep sides. They allow Yakima 1A Raingutter Towers to be used in some situations where no rain gutters exist (towers sold separately).
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.
Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.
Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.
Origin-8's Bike Block Fork Mount can be mounted to almost any flat surface and securely holds your bike by the fork. It's made of sturdy steel and works with quick release 9mm dropouts as well as 15mm and 20mm through axles!