Surly offers you spiders for their Mr. Whirly Cranks in a variety of Bolt Circle Diameters (BCDs) so you can run nearly any chainring combination you want. Be sure to check chainring/frame compatibility for your intended setup.
This is a drive-side stop washer for your Surly Mr. Whirly Crank. It ensures you're properly spaced out down there.
This OD Crank Single Speed Spacer Kit gets your Surly OD Crank ready to run as a single. Indluces chainring bolts and spacers. Just add chainring (sold separately).
• Square taper interface • Only includes left crank
- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles
Race Face direct-mount chainring spider for Cinch ranksets.
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
• Horizontal square interface • Only includes left crank
- XC or Cyclocross top guide, ideal for 1x drivetrains - ST and CX guides mount to 28.6, 31.8 and 34.9 seat tubes - E-Type guides fit Shimano E-Type and SRAM S3 frame mount standards
• OctaLink interface • Only includes left crank • 175mm length
- Sunlite Cottered Pins
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Slap on TruVativ's RockGuard and pin it through the rough. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum…
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for inner triple chainrings, each set includes 5 male bolts to securly connect your chainrings to your crank.
• 6061-T6 aluminum construction • Adapts 110 or 130 bcd 5-bolt chainrings to fit one-piece or three-piece single bolt cranks • Anodized finish • Made in the U.S.A.
Spacers to insure proper chainline and chainring spacing on your bike. • 0.6mm thick • Sold in a bag of 20 spacers
Race Face aluminum Torx chainring nut/bolt set for triple chainrings. Includes four nut/bolt sets.
- Aluminum Hollowtech-II (HT8) crank-arm to BB-spindle Mounting Bolt - Bolt: only one needed for non-drive side
Pioneer's Shimano Ultegra 6800 Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. The Ultegra 6800 left crank arm meter truly brings power to the people, and gives every rider power-based (also called watt-based) training performance, allowing you to fine-tune…
Pioneer's Shimano Dura Ace 9000 Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. The Dura Ace 9000 left crank arm meter allows every rider power-based (also called watt-based) training performance, allowing you to fine-tune your pedaling to find race-winning…
Power to the people! Add the Pioneer Power meter to your existing Shimano crank. Pioneer's crankset-based power meters are simply some of the best power-monitoring systems on the planet, and the Upgrade Kit gives you the chance to add it to your existing crankset. At the heart of the Pioneer Power…
- 8 bikes worth of adapters for Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. - 65 piece kit includes 4 each Shimano and SRAM adapter sets, plus extra spacers for…
- 104 BCD spider is compatible with all TRS+ and TRSr cranks - TRS+ single spider is not drilled for a granny ring - TRS+ double spider has holes for 64 BCD granny ring - Spiders require TRS lockring and removal tool (sold separately)
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation…
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or…
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage…